How to Run Windows 11 in Safe Mode

The Honest Answer First: Safe Mode Is the Workshop, Not the Garage

When a Windows PC starts misbehaving — crashing on startup, freezing at the sign-in screen, showing a black screen, or running so slowly you cannot do anything — the instinct is to keep restarting it and hoping. Hope is not a repair strategy. Windows has a built-in diagnostic mode designed for exactly this moment, and it has been there for decades: Safe Mode.

Safe Mode starts Windows with only the essential files and drivers it needs to run: a basic display driver, the keyboard and mouse, and the core system services. Everything else — third-party drivers, startup programs, most of your apps — stays switched off. If your PC works fine in Safe Mode but not normally, the problem is almost certainly a driver, a startup program, or something you installed recently. If it fails in Safe Mode too, the problem is deeper, and you have learned something valuable without spending a penny.

This guide shows you every way to get into Safe Mode on Windows 11, explains the three types and which one to pick, walks you through the repairs worth doing once you are in, and shows you how to get out again — including the one mistake that traps people in Safe Mode forever. It also covers the case where Windows will not start at all, which is when Safe Mode matters most.

As of November 2026, these steps apply to Windows 11 Home and Pro, including versions 23H2, 24H2, and 25H2. The old trick of pressing F8 during startup no longer works — Microsoft removed it in Windows 8 because modern PCs start too fast for a key press to register — so do not waste time hammering the keyboard. The methods in this guide are the ones that work now.

What Safe Mode Is, and Which Type to Choose

Safe Mode is Windows running on a skeleton crew. It loads a minimal set of drivers and services, uses a basic low-resolution display driver, and skips every program that normally starts with Windows. The desktop looks plain — black background, “Safe Mode” written in the corners, a low resolution that makes everything look large — and that plainness is the point. It is Windows stripped down to the parts that almost never fail, so you can find the part that does.

When you reach the Startup Settings screen, Windows offers three versions, and choosing the right one saves you a trip back. Enable Safe Mode — press 4 or F4 — is the plain version: no network, no internet, just the desktop. It is the right choice for removing a bad app or driver, or checking whether a problem goes away when nothing extra is running. Enable Safe Mode with Networking — press 5 or F5 — adds network drivers and services, so you can get online. Choose this one if you need to download a driver, run an online malware scan, or look up instructions while you work. Enable Safe Mode with Command Prompt — press 6 or F6 — replaces the desktop with a Command Prompt window. It is for repairs you already know how to run as commands, and most people should not pick it first.

A practical rule: start with plain Safe Mode if you are removing something, and Safe Mode with Networking if you need the internet. You can always restart and pick a different one. There is no cost to choosing wrong except a restart.

One thing Safe Mode does not do is fix your PC by itself. It is a diagnostic environment, not a repair tool. The fixing happens in what you do while you are in it — uninstalling, rolling back a driver, running a scan — and the rest of this guide covers those jobs in order of usefulness.

How to Enter Safe Mode from Settings

This is the easiest method the first time, because every screen is labelled and you can do it while Windows is still running normally. Use it when your PC starts and you can sign in, but something is wrong once you are in.

Step 1: Save your work and close your apps. Safe Mode requires two restarts, and anything unsaved will be lost. Save open documents, close your programs, and make sure you know your sign-in password — you will need it in Safe Mode, and if you normally sign in with a PIN or Windows Hello face recognition, the PIN may not be available in Safe Mode on some PCs, so the password is the safe option.

Step 2: Open Settings and go to System, then Recovery. Press Windows key + I to open Settings. The app opens on the System page. Scroll down and select Recovery. The page lists your recovery options.

Step 3: Next to Advanced startup, select Restart now. In the Recovery options section, find Advanced startup and select Restart now. Windows will ask you to confirm, because the PC restarts straight away. Select Restart now again in the message. After a few seconds, a blue Choose an option screen appears.

Step 4: Select Troubleshoot, then Advanced options. On the Choose an option screen, select Troubleshoot. On the next screen, select Advanced options. You will see a list of repair tools — Startup Repair, Command Prompt, System Restore, and others. The one you want is Startup Settings.

Step 5: Select Startup Settings, then Restart. Select Startup Settings, then select Restart. The PC restarts again and shows a numbered list of startup options.

Step 6: Press 4, 5, or 6 to choose your Safe Mode. Press 4 or F4 for plain Safe Mode, 5 or F5 for Safe Mode with Networking, or 6 or F6 for Safe Mode with Command Prompt. Windows starts and asks you to sign in. The desktop that appears will look plain and low-resolution — that is normal, and it is how you know you are in Safe Mode.

If the Choose an option screen does not appear, or the PC boots normally instead, try the Shift + Restart method in the next section. Some PCs skip the advanced startup screen if the restart is interrupted, and the Shift method is more reliable.

How to Enter Safe Mode with Shift + Restart

This is the fastest method, and the most useful one, because it works from the sign-in screen too — which matters when you cannot get past the password prompt.

Step 7: Open the Start menu and select the Power icon. Select Start, then the Power icon. At the sign-in screen, the Power icon is in the bottom-right corner of the screen — you do not need to sign in to use it.

Step 8: Hold Shift and select Restart. Press and hold the Shift key on your keyboard, and while holding it, select Restart. Keep holding Shift until the screen goes dark. The Choose an option screen appears.

Step 9: Select Troubleshoot, then Advanced options, then Startup Settings, then Restart. Follow the same path as the Settings method: Troubleshoot, then Advanced options, then Startup Settings, then Restart. The PC restarts and shows the numbered startup options.

Step 10: Press 4, 5, or 6. Press 4 or F4 for Safe Mode, 5 or F5 for Safe Mode with Networking, or 6 or F6 for Safe Mode with Command Prompt. Sign in when asked.

Memorise this method. It is the one you will use in a real emergency, when Windows is misbehaving and you cannot think clearly, and the fact that it works from the sign-in screen makes it the most valuable of the four methods in this guide.

How to Enter Safe Mode with msconfig

Msconfig — the System Configuration tool — is the best method when you know in advance that you will need Safe Mode several times, because it sets the PC to boot into Safe Mode on every restart until you turn it off. That is also its danger, as the exit section of this guide explains.

Step 11: Press Windows key + R, type msconfig, and press Enter. The Run window opens. Type msconfig and press Enter, or click OK. The System Configuration window opens. You can also open it by typing System Configuration in the Start search box.

Step 12: Go to the Boot tab and tick Safe boot. In the System Configuration window, open the Boot tab. Under Boot options, tick the box labelled Safe boot. By default, the Minimal option is selected, which is plain Safe Mode. If you want networking, select the Network option instead. If you want Command Prompt, select Alternate shell.

Step 13: Click OK, then restart when asked. Click OK, then Apply if it appears, and Windows will ask whether to restart now. Click Restart. The PC boots straight into Safe Mode, without any menus. Every restart after this one will also boot into Safe Mode, until you undo the setting — see the section on exiting Safe Mode, and do not skip it.

Use msconfig when you are doing a job that needs several restarts in Safe Mode — removing a stubborn driver, for example, where each attempt needs a reboot. For a one-off visit, the Settings or Shift methods are better, because they return to normal Windows automatically.

How to Enter Safe Mode When Windows Will Not Start

This is the method that matters most, because it is the one you need when the PC will not boot at all — a black screen, a crash loop, or a freeze before the sign-in screen. Windows has a built-in rescue: if it fails to start twice in a row, it opens the Windows Recovery Environment automatically on the third attempt.

Step 14: Force the recovery environment by interrupting startup twice. Hold the power button until the PC shuts down completely. Wait about ten seconds, then press the power button to turn it back on. As soon as the manufacturer’s logo appears on the screen, press and hold the power button until the PC shuts down again. Wait a few seconds, turn it on again, and interrupt it the same way a second time. On the third start, Windows should load the Windows Recovery Environment — the blue Choose an option screen — instead of trying to boot normally.

Step 15: Select Troubleshoot, then Advanced options, then Startup Settings, then Restart. From the recovery environment, follow the same path: Troubleshoot, then Advanced options, then Startup Settings, then Restart.

Step 16: Press 4, 5, or 6 to choose your Safe Mode. Press 4 or F4 for Safe Mode, 5 or F5 for Safe Mode with Networking, or 6 or F6 for Safe Mode with Command Prompt, then sign in.

Forcing shutdowns by holding the power button is safe to do in this situation — it is the method Microsoft itself documents — but do it only as many times as needed, and do not do it casually on a healthy PC. If the recovery environment does not appear after three attempts, the problem may be with the recovery partition itself, and you will need Windows installation media or a recovery USB drive, which is beyond this guide.

What to Do Once You Are in Safe Mode

Getting into Safe Mode is half the job. The other half is using the time there well. Work through these in order — the most common fixes first — and restart into normal Windows after each one to check whether it worked, rather than doing everything at once and not knowing which change fixed it.

Step 17: Check whether the problem happens in Safe Mode at all. Before changing anything, just use the PC for a few minutes. Open a program, browse a folder, leave it running. If the crash or freeze happens in Safe Mode too, the problem is likely with Windows itself or the hardware, and reinstalling a driver will not fix it. If the PC behaves perfectly in Safe Mode, the problem is almost certainly a third-party driver, a startup program, or an app you installed — and the steps below will find it.

Step 18: Uninstall the app or update you installed just before the problem started. Go to Settings, then Apps, then Installed apps, and sort by date installed. Uninstall the most recent app, especially if the problem started the same day you installed it. Then go to Settings, then Windows Update, then Update history, then Uninstall updates, and remove the most recent update if the problem started after an update. Restart normally and test.

Step 19: Roll back or reinstall a driver. The most common cause of a PC that works in Safe Mode but not normally is a bad graphics driver. Press Windows key + X and select Device Manager. Expand Display adapters, right-click your graphics card, and select Properties, then the Driver tab. If Roll Back Driver is available, click it and choose a reason. If it is greyed out, right-click the device and select Uninstall device, tick the box to delete the driver software, and restart — Windows will install a basic driver, and you can download the proper one from the manufacturer’s website afterwards. Do the same for any device with a yellow warning triangle in Device Manager.

Step 20: Run a malware scan. Malware can cause exactly the symptoms that send people into Safe Mode — crashes, slowness, strange pop-ups — and Safe Mode with Networking lets you run a full scan with the bad software unable to fight back. Open Windows Security from the Start menu, go to Virus & threat protection, and run a Full scan. If you have a second opinion scanner, such as the free Microsoft Safety Scanner, download it while you have networking and run that too.

Step 21: Disable startup programs that might be the culprit. Press Ctrl + Shift + Esc to open Task Manager, go to the Startup apps tab, and disable anything you do not recognise or do not need at startup — especially anything added recently. Restart normally and see if the problem is gone. If it is, re-enable the programs one at a time, restarting after each, until the problem returns. The last one you re-enabled is the culprit.

Step 22: Run System File Checker. If Windows itself is damaged, the System File Checker can repair it. Right-click the Start button and select Terminal (Admin) or Windows PowerShell (Admin). Type sfc /scannow and press Enter, then wait — it can take 15 minutes or more. When it finishes, it will tell you whether it found and repaired corrupt files. If it reports that it could not repair some files, run DISM /Online /Cleanup-Image /RestoreHealth in the same window, then run sfc /scannow again.

How to Exit Safe Mode

Getting out of Safe Mode should be the easiest part of this guide, and for three of the four entry methods it is: just restart the PC and it boots normally. But the msconfig method traps people, and it traps them because the setting that put them in Safe Mode stays set until they undo it.

Step 23: Restart normally if you entered through Settings, Shift + Restart, or the recovery environment. Select Start, then Power, then Restart. Windows boots normally. If it boots into Safe Mode again, you probably entered through msconfig without realising it — move to the next step.

Step 24: If you used msconfig, undo the Safe boot setting. In Safe Mode, press Windows key + R, type msconfig, and press Enter. Go to the Boot tab and untick the Safe boot box. Click OK and restart. Windows boots normally. This is the step people forget, and it is why forums are full of “my PC is stuck in Safe Mode” posts — the PC is not stuck, the setting is still on. Untick it and the problem is gone.

Step 25: If Windows still boots into Safe Mode after unticking, check for a stuck key or a boot setting. A stuck Shift key or a faulty keyboard can make Windows think you are requesting advanced startup. Try a different keyboard, or unplug the keyboard and restart. If the problem persists, open Terminal as administrator and run bcdedit /deletevalue {default} safeboot, then restart. Only use that command if the msconfig fix did not work — it edits the boot configuration directly, and a typo there can cause real trouble.

What to Do When Safe Mode Does Not Help

Sometimes Safe Mode tells you the problem is not a driver or an app at all, and that is useful information, even if it is not the answer you wanted. Here is how to read the result.

Step 26: If the PC fails in Safe Mode too, try Startup Repair. Restart into the recovery environment — Settings, then System, then Recovery, then Advanced startup, then Restart now, or the forced-interruption method — and select Troubleshoot, then Advanced options, then Startup Repair. Let it run. It checks the boot files and repairs what it can, and it takes a few minutes.

Step 27: If Startup Repair fails, try System Restore. In the same Advanced options screen, select System Restore and pick a restore point from before the problem started. System Restore returns Windows system files and settings to that date without touching your personal files, though it will remove apps and drivers installed after the restore point. It is the closest thing Windows has to an undo button.

Step 28: If nothing works, consider a hardware problem. A PC that crashes in Safe Mode, fails Startup Repair, and has no working restore point may have failing hardware — most often memory or storage. Windows Memory Diagnostic, found in the recovery environment or by typing Windows Memory Diagnostic in Start search, can test the memory. A failing drive often announces itself with clicking sounds, or with errors in the Event Viewer. At this point, backing up your files — from Safe Mode with Networking, or by removing the drive — matters more than further repairs, and a repair shop is a reasonable next step.

Frequently Asked Questions

How do I run Windows 11 in Safe Mode? The easiest way is to hold Shift while selecting Restart from the Start menu, then go to Troubleshoot, then Advanced options, then Startup Settings, then Restart, and press 4, 5, or 6. You can also use Settings, then System, then Recovery, then Advanced startup.

What is the difference between Safe Mode and Safe Mode with Networking? Plain Safe Mode loads no network drivers, so you cannot get online. Safe Mode with Networking adds network drivers, so you can download drivers, run online scans, and look up help. Use plain Safe Mode for removing things and Networking when you need the internet.

Why does F8 not work to enter Safe Mode anymore? Microsoft removed the F8 keypress in Windows 8 because modern PCs start too fast for a key press to register reliably. The replacement is the advanced startup menu, reached through Settings, Shift + Restart, or the automatic recovery environment after two failed starts.

How do I exit Safe Mode? Just restart the PC. If you entered through msconfig, you must first open msconfig, go to the Boot tab, untick Safe boot, and then restart — otherwise the PC will keep booting into Safe Mode.

Is Safe Mode safe to use? Yes. Safe Mode only loads essential drivers and skips startup programs. It does not change or delete anything by itself. The changes you make while in Safe Mode — uninstalling an app, rolling back a driver — are the same changes you would make in normal Windows, and they take effect the same way.

Can I use the internet in Safe Mode? Only in Safe Mode with Networking. Plain Safe Mode has no network drivers. If you need to download a driver or run an online scan, choose Networking — press 5 or F5 on the Startup Settings screen.

Why does Safe Mode look low-resolution? Safe Mode uses a basic display driver instead of your graphics card’s full driver, so the screen runs at a low resolution and everything looks large. This is normal, and the display returns to normal when you restart into regular Windows.

Can I install programs in Safe Mode? Usually not — the Windows Installer service does not run in Safe Mode by default, so most installers will fail. Uninstalling usually works, which is the direction you need in Safe Mode. Install the replacement driver or app after you restart into normal Windows.

What if Windows will not start at all? Interrupt startup twice by holding the power button when the manufacturer’s logo appears, and Windows will open the recovery environment on the third start. From there, go to Troubleshoot, then Advanced options, then Startup Settings, then Restart, and press 4, 5, or 6.

Does Safe Mode delete my files? No. Safe Mode does not delete anything. It only changes which drivers and programs load at startup. Your files are exactly where you left them, and they are untouched by entering or exiting Safe Mode.

Final Thoughts

Safe Mode is not glamorous, and it is not new, but it is the single most useful diagnostic tool in Windows, and it has been for thirty years. It answers the most important question about any PC problem — is this Windows, or is this something I installed? — in about two minutes, and the answer points you at the fix.

Learn the Shift + Restart method now, while your PC is healthy, so you do not have to learn it when your PC is not. The next time a program misbehaves after an update, or a driver goes wrong, or the screen goes black, you will know exactly what to do: hold Shift, click Restart, press 4, and start looking. And remember the one rule that matters most — if you used msconfig to get in, untick Safe boot before you leave, or you will be coming back to Safe Mode whether you want to or not.

Facebook comments