The Honest Answer First: There Is No Single Wireless Method for Every Phone
If you want to share your screen from your phone to your PC wirelessly, the method that works depends on which phone you own and which version of Windows you run. There is no universal button that mirrors every phone to every PC, and anyone who tells you otherwise is skipping over the limits. Android phones and iPhones take different paths, and even among Android phones the right choice changes with the brand and what your PC hardware supports. The details below are current as of November 2026.
The good news is that most people do not need to buy anything or install anything strange. If you have a Windows 11 PC and a Samsung, Xiaomi, OnePlus, OPPO, Realme, vivo, or HONOR phone, you almost certainly have a built-in way to get your phone screen onto your PC without a cable. If you have a Google Pixel phone, one built-in path is closed to you, but another one works. If you have an iPhone, the honest news is harder: Windows has no built-in AirPlay receiver, so there is no built-in way to mirror an iPhone screen to a Windows PC, and you will need a third-party app if that is what you want to do.
This guide walks you through four methods in plain order. Method 1 uses the Wireless Display feature built into Windows 11 and works over Miracast for many Android phones. Method 2 uses Phone Link, also built into Windows 11, and gives you a controllable phone screen on supported Android phones. Method 3 is scrcpy, a free and open-source tool for people who are comfortable with a command line and want very low delay. Method 4 covers third-party casting apps, the practical fallback for iPhone owners and for anyone whose hardware does not support the built-in options. You will also find a short comparison to help you pick, fixes for the problems people hit most often, and clear steps for stopping the share and keeping private things private.
Which Method Fits Your Phone?
Before you touch any setting, match your phone to the right method. This one decision saves most of the frustration people report, because the commonest failure is not a broken setting at all — it is trying a method the phone was never designed to use. If you have a Samsung, Xiaomi, OnePlus, OPPO, Realme, vivo, or HONOR Android phone, start with Method 1, the Wireless Display feature, if you only want to show your screen on the PC — for example to show photos, a video, or a presentation to a room. It needs no extra app on either side, and it carries sound to the PC. If you also want to control the phone from the PC with your mouse and keyboard, or run individual phone apps in their own windows, Method 2, Phone Link, is the better fit on supported models.
If you have a Google Pixel phone, skip Method 1 entirely. Pixel phones do not support Miracast, so they will not find your PC with Wireless Display no matter how carefully you follow the steps. Use Method 2, Phone Link, instead, if your Pixel model is supported, or Method 3, scrcpy, if you are comfortable with a command line. The same rule applies in reverse for iPhones: iPhones do not support Miracast either, because iPhone Screen Mirroring uses AirPlay, and Windows has no built-in AirPlay receiver. So an iPhone cannot mirror its screen to Windows with built-in tools alone, and your realistic options are a third-party casting app under Method 4, or a different receiver entirely.
If you are comfortable with a command line and you want the lowest delay — for example to play a game or demonstrate an app smoothly — Method 3, scrcpy, is worth the extra setup. It is free and open source, it mirrors and controls Android with very low delay, and it works over USB or Wi-Fi once you have enabled USB debugging one time. If that sentence already sounds like too much work, pick Method 1 or Method 2 instead. There is no prize for choosing the hardest method, and the built-in options are good enough for showing a screen, sharing photos, or walking someone through an app.
One more check before you start: make sure your PC is running Windows 11, version 22H2 or later, for the Wireless Display steps, and that your phone is charged and its Wi-Fi is switched on. Miracast uses Wi-Fi Direct, so both devices need Wi-Fi on but do not necessarily need to be on the same network. Phone Link and most third-party casting apps are stricter: both devices must be on the same Wi-Fi network. Knowing that difference now will save you from chasing a network problem that is not a problem at all.
Method 1: Windows Wireless Display (Miracast) for Android
Wireless Display turns your Windows 11 PC into a Miracast receiver, which is the same kind of target your phone looks for when you tap Cast. It is the closest thing to a built-in answer for Android screen sharing on Windows, and it needs no extra app on either side. The catch is the setup order: Windows 11 does not install the receiver by default, so you add it once as an optional feature, set who is allowed to project to your PC, and then open the receiver app before you cast from the phone.
Step 1: Open Settings on your PC and go to System, then Projecting to this PC. Click Start, open Settings, and choose System from the left-hand menu. Scroll down to Projecting to this PC and open it.
Step 2: Read what the Projecting page tells you about Miracast support. Look at the top of the page before you change anything. If it says your device supports receiving Miracast, you can continue with the steps below. If it says “This device doesn’t support receiving Miracast”, stop here and move to Method 2, because this method will not work on your PC.
Step 3: Follow the Optional features link if Windows prompts you to add Wireless Display. Windows 11 does not install the receiver by default, so the Projecting page may point you to Optional features to add it. Click the link if you see it, and let it take you to the Optional features page in Settings.
Step 4: Add the “Wireless Display” optional feature to your PC. On the Optional features page, choose Add an optional feature or View features, search for “Wireless Display”, tick it, and install it. The install is small, but give it a minute or two to finish before you move on.
Step 5: Wait a minute or two and confirm the install has finished. Optional features install quietly in the background, so it is easy to move on too soon. Stay on the page until Wireless Display shows as installed, or check the recent activity list on the same page.
Step 6: Go back to Projecting to this PC and set who can project to you. Return to Settings, then System, then Projecting to this PC. You will see a setting for who is allowed to project to this PC, and you should set it to “Available everywhere on secure networks”.
Step 7: Open the Wireless Display app from the Start menu. Click Start, type “Wireless Display”, and open the app when it appears. The app opens a full-screen waiting view that shows your PC’s name and says it is ready for a connection.
Step 8: Check the PC name shown in the Wireless Display app and remember it. The waiting screen shows the name your phone will look for, which is usually your PC’s device name. Remember it exactly, or keep the screen visible so you can match it on the phone in the next step.
Step 9: On your Android phone, open Quick Settings and tap Cast, Smart View, Screen Cast, Screen Mirroring, or Wireless Display. Swipe down from the top of your phone screen to open Quick Settings, and look for the cast control. Samsung phones call it Smart View, Xiaomi phones may call it Cast or Miracast, and other brands use Screen Cast, Screen Mirroring, or Wireless Display.
Step 10: Pick your PC name from the list and wait for the connection to start. Tap your PC’s name when it appears in the list of available devices. The phone will connect over Wi-Fi Direct, so both devices need Wi-Fi switched on, but they do not necessarily need to be on the same network.
Method 2: Phone Link — Android Screen on Windows 11
Phone Link is built into Windows 11, and it does more than mirror a picture of your phone. On supported Android phones it shows the phone screen in a window on your PC and lets you control it with your mouse and keyboard, so you can tap, swipe, type, and open apps without picking the phone up. On some phones you can even run individual apps on the PC, each in its own window.
The limits are worth stating plainly. The phone screen feature works on Android 10 or later in select markets, on supported phones from Samsung, HONOR, OnePlus, OPPO, Realme, vivo, and Xiaomi, and your PC needs a graphics card that supports DirectX 11. Both devices must be on the same Wi-Fi network for this method, which is stricter than Miracast. For iPhone, Phone Link is a different product in practice: it gives you calls, texts, and notifications on the PC, but no screen mirroring, so iPhone owners should not follow these steps expecting a mirrored screen.
Step 11: Open Phone Link on your PC and confirm it is signed in and ready. Click Start, type “Phone Link”, and open the app that is built into Windows 11. If it asks you to sign in with a Microsoft account, sign in with the account you normally use on the PC.
Step 12: Check that the Link to Windows app is on your phone. On your Android phone, look for the Link to Windows app. It is preinstalled on many Samsung and HONOR phones, and it is available on Google Play for other supported phones.
Step 13: Start the pairing from Phone Link and choose Android as the phone type. In Phone Link on the PC, choose to add a phone and select Android when it asks what kind of phone you have. The PC will show a QR code on screen for pairing.
Step 14: Scan the QR code with Link to Windows on your phone. Open Link to Windows on your phone, choose to link your phone and PC, and point the camera at the QR code on the PC screen. The two apps will find each other and start pairing.
Step 15: Grant the permissions Phone Link asks for, and read them as you go. The phone will ask for permissions such as notifications, contacts, messages, and access to the phone screen. Grant the ones that match what you want Phone Link to do, and read each prompt instead of tapping through blindly.
Step 16: Wait for the link to finish, then open the phone screen view in Phone Link. Give the pairing a few seconds to complete, and check that your phone appears as linked in Phone Link on the PC. Then choose the phone screen or apps view inside Phone Link.
Step 17: Control the phone from the PC with your mouse and keyboard. Click to tap, drag to swipe, and type with your PC keyboard when a text field is open on the phone screen. On supported phones you can also open individual apps from Phone Link so they run in their own windows.
Method 3: scrcpy — Free, Low-Delay, for Advanced Users
scrcpy is a free, open-source tool that mirrors and controls an Android phone from a PC with very low delay. It is the choice of people who demonstrate apps, test software, or play games and notice lag in other methods, because the picture stays close to real time. The trade-off is honest: this is not a one-tap app, and it needs a computer-side install and a command line.
Step 18: Decide whether scrcpy fits how you work before you install anything. Choose scrcpy if you are comfortable opening a terminal or command prompt, installing software on your PC, and following written setup instructions. Skip it if you want a one-tap cast or if you need to hand the setup to someone else who is not technical, because the built-in methods will be faster and less fragile for that person.
Step 19: Download scrcpy only from its official project page. Get scrcpy from the official project release page for your operating system, and do not download it from an unofficial mirror or a bundled installer. Check that the download matches your system, and keep the file in a folder you can find again, because you will run it from there or add it to your system path.
Step 20: Enable Developer options and USB debugging on your Android phone. On the phone, go to Settings, then About phone, and tap the build number several times until Developer options are enabled. Then go to Settings, then Developer options, and switch on USB debugging.
Step 21: Connect the phone to the PC once by USB and allow the debugging prompt. Plug the phone into the PC with a USB cable, and when the phone asks whether to allow USB debugging from this computer, allow it. This first wired connection is what lets the PC and phone trust each other, and it is also how wireless ADB is set up in the first place.
Step 22: Start scrcpy and check that the phone screen appears on the PC. With the phone connected, run scrcpy from your PC by following the official instructions for your system. The phone screen should appear in a window on the PC, and you should be able to control it with your mouse and keyboard.
Step 23: Switch to wireless ADB if you want to unplug the cable. Once the wired connection works, follow the official scrcpy or Android wireless debugging instructions to connect over Wi-Fi, then unplug the cable and start scrcpy again. The phone and PC must be on the same Wi-Fi network for wireless ADB, and you may need to repeat the wireless connection step after the phone restarts.
Method 4: Third-Party Casting Apps
Third-party casting apps are the practical answer when the built-in methods do not fit your phone. That includes iPhone owners, because Windows has no built-in AirPlay receiver, and it includes anyone whose PC hardware does not support Miracast or whose phone model is not supported by Phone Link.
Step 24: Pick one casting app and get it only from its official site or store. Choose an app such as LetsView, AirDroid Cast, or ApowerMirror, and download it from the app’s own official website or from Google Play or the App Store. Do not download a casting app from a file-sharing site or a link in a video description, because a fake copy can ask for the same screen permission and misuse it.
Step 25: Install the same app on your phone and on your PC. Install the phone version on your phone and the PC version on your computer, and make sure both are the same app from the same maker. A phone app cannot cast to a different maker’s PC app, and mixing them up is a common reason the PC never appears in the phone’s list.
Step 26: Put the phone and the PC on the same Wi-Fi network. Check the Wi-Fi network name on both devices and make sure they match exactly, including the difference between a 2.4 GHz and a 5 GHz network name if your router shows them separately. Most casting apps need both devices on the same network to find each other, and this is the step to check first whenever the PC does not appear.
Step 27: Connect the phone to the PC with the code or QR code the app shows. In the phone app, choose to cast or mirror, and enter the numeric code shown on the PC app, or scan the QR code the PC app displays. Accept any connection prompt on the PC, and wait a few seconds for the phone screen to appear.
Step 28: Read the permissions the app asks for before you grant them. The app will ask for screen recording or screen casting permission at least, and it may ask for more, such as microphone, storage, or notifications. Grant only what the mirroring you want actually needs, and be wary of an app that demands broad access to your contacts or files for a simple screen share.
Fixing Common Problems, Stopping the Share, and Staying Private
Most wireless screen-sharing failures come from a short list of causes, and they are worth working through in order before you reinstall anything. The first question is always which method you are using, because the fix for a Miracast problem is different from the fix for a Phone Link problem. The second question is whether the receiver is actually running: the Wireless Display app must be open, Phone Link must be linked, and a casting app must be open on both devices. A surprising number of “not found” reports end there.
Sound is the other common confusion, and it behaves differently by method. Miracast carries audio to the PC, so when you cast a video over Wireless Display you should hear it from the PC speakers. Phone Link is different: on most setups the audio stays on the phone, so a video mirrored through Phone Link may play silently on the PC while the sound comes from the phone itself. That is a limit of the setup rather than a fault, so check where the sound is coming from before you change volume settings or reinstall drivers. With third-party apps, check the app’s own audio setting, because some mirror video only unless you enable audio sharing. Lag and stutter usually come from the Wi-Fi connection rather than from the phone or the PC, so moving closer to the router and closing other heavy downloads often helps more than changing any mirroring setting.
Step 29: If the PC does not appear in the cast list, check the receiver first, then the Wi-Fi. Confirm the Wireless Display app is open on the PC for Method 1, or that Phone Link is linked and running for Method 2, or that the casting app is open on both devices for Method 4. Then check that Wi-Fi is switched on on both devices, and that both are on the same Wi-Fi network for Phone Link and third-party apps.
Step 30: If the picture lags or stutters, improve the Wi-Fi connection before changing settings. Move the phone and the PC closer to the router, and switch both to the 5 GHz Wi-Fi network if it is available and both devices support it. Close large downloads, video streams, or cloud backups running on the same network, and lower the video quality or close other apps on the phone if the app offers that choice.
Step 31: If there is no sound, check where the audio is supposed to come from for your method. With Miracast, the sound should come from the PC, so check the PC volume and that the PC speakers are the output device. With Phone Link, the sound stays on the phone on most setups, so turn the phone volume up and listen there instead of at the PC.
Step 32: Stop the share from the phone, and check the PC screen is clear afterwards. On the phone, open the cast control again and tap Disconnect, Stop, or the name of the PC to end the session, or close the casting app. In the Wireless Display app, close the app once the phone has disconnected, and in Phone Link close the phone screen window.
Privacy deserves its own thought, because screen sharing shows everything on your phone, not just the app you meant to share. Notifications, messages, photos, and banking apps all appear on the PC screen exactly as they appear on the phone. Do not mirror banking apps, private messages, or anything with personal details on a shared screen or a PC someone else can see. Switch on Do Not Disturb before you start, so a private message does not pop up in front of a room, and close any app you do not want shown before you cast.
Frequently Asked Questions
Can I share my phone screen to my PC wirelessly for free? Yes, in most cases you can, because the built-in methods cost nothing. Wireless Display and Phone Link are built into Windows 11, and scrcpy is free and open source, so an Android owner usually needs no paid app at all.
Why can’t my PC find my phone, or my phone find my PC? The commonest cause is that the receiver is not running or not ready, so check that the Wireless Display app is open, Phone Link is linked, or the casting app is open on both devices. Then check Wi-Fi: it must be switched on on both devices, and Phone Link and most third-party apps need both on the same Wi-Fi network.
Can I mirror a Google Pixel phone to a Windows PC? Yes, but not with Wireless Display, because Pixel phones do not support Miracast and will not find the PC that way. Use Phone Link if your Pixel model is supported, or scrcpy if you are comfortable with a command line and want very low delay.
Can I mirror an iPhone screen to a Windows PC? Not with built-in Windows tools, because iPhone Screen Mirroring uses AirPlay and Windows has no built-in AirPlay receiver. Your realistic option on Windows is a third-party casting app installed on both the iPhone and the PC, connected on the same Wi-Fi network. Download it only from the official site or the App Store, and check what permissions it asks for.
Do my phone and PC need to be on the same Wi-Fi network? It depends on the method. Miracast uses Wi-Fi Direct, so both devices need Wi-Fi on but do not necessarily need to be on the same network. Phone Link and most third-party casting apps do need both devices on the same Wi-Fi network, and wireless ADB for scrcpy needs that too.
Can I control my phone from the PC while the screen is shared? Yes, with Phone Link on supported Android phones and with scrcpy, both of which let you use your mouse and keyboard to tap, swipe, and type on the phone screen. Wireless Display on its own shows the screen but does not give you that control from the PC, so you still use the phone itself to navigate.
Why is there no sound on the PC when I mirror my phone? The answer depends on the method, because sound does not behave the same way everywhere. Miracast carries audio to the PC, so check the PC volume and output device if you hear nothing. Phone Link is different: on most setups the audio stays on the phone, so the sound comes from the phone speaker even while the picture is on the PC.
Why does the mirrored screen lag or freeze? Lag usually comes from a weak or crowded Wi-Fi connection, and it shows up most on video, games, and fast movement, while still screens look fine. Move closer to the router, use the 5 GHz network if your devices support it, and close heavy downloads and streams on the same network.
Is it safe to mirror my phone to a PC? It is safe on your own PC on your own network if you use the built-in features or a reputable app, but remember that everything on the phone screen is visible on the PC screen, including notifications and messages. Do not mirror banking apps or private messages on a shared or work PC, switch on Do Not Disturb before you start, and disconnect as soon as you are done. Only download casting apps from official sites or stores, and only grant the permissions the mirroring actually needs.
How do I stop sharing my screen? Open the cast control on your phone and tap Disconnect or Stop, or close the casting app on the phone. Then close the Wireless Display app or the phone screen window on the PC, and check that the PC screen no longer shows your phone. Disconnecting from the phone is the reliable step — closing the PC window alone may not end the session on the phone.
Final Thoughts
Sharing your screen from your phone to your PC wirelessly is straightforward once you pick the method that matches your phone, and that choice is the whole guide in one sentence. Android owners with a Samsung, Xiaomi, OnePlus, OPPO, Realme, vivo, or HONOR phone should start with Wireless Display for showing a screen, or Phone Link when they want to control the phone from the PC. Pixel owners should skip Wireless Display and go to Phone Link or scrcpy, and iPhone owners should know plainly that Windows has no built-in way to receive an iPhone screen, so a third-party app is the honest path on Windows.
If your first attempt does not work, do not assume something is broken. Check the receiver is open, check Wi-Fi is on, and check that both devices are on the same network where the method needs it. Check the hardware message on the Projecting page before you spend time on a method your PC cannot run, and check where the sound is supposed to come from before you chase a volume problem that is not a problem. Most failures are one of those checks, and most of them take less than a minute to rule out. Keep the session short and private by habit: switch on Do Not Disturb, close anything you do not want shown, and disconnect from the phone as soon as you are done.

Facebook comments